Prime3 SAP51

EAN: 5901750503207

Polluted air does not help anyone. Headaches, fatigue, or allergies are the most common side effects. Especially during the heating season, air quality tends to deteriorate. Then odors, suspended dust, and unpleasant smells emitted from chimneys exceed permissible standards. The SAP51 air purifier offers a 7-stage air purification process, which eliminates all pollution in the form of dust, bacteria, and viruses, as well as various types of allergens.

The SAP51 model is equipped with five filters (pre-filter, cold catalyst, activated carbon, antibacterial, and HEPA), an ionizer, and a UV lamp, guaranteeing the removal of 99.95% of PM2.5 suspended dust (diameter not exceeding 2.5 µm), 99.99% of bacteria and viruses, and 99% of volatile organic compounds.

The mechanical pre-filter is designed to purify the air from all major solid pollutants, such as dust, hair, or pet fur. The use of the activated carbon filter is aimed at neutralizing unpleasant odors and volatile organic compounds. Installed as the third cold catalyst filter, it is a modern filter that removes carbon monoxide, hydrogen sulfide, ammonia, benzene, formaldehyde, and other harmful volatile organic compounds from the air. The antibacterial filter, as the name suggests, is tasked with eliminating bacteria, viruses, and mold and preventing their development in the device.

In the final filtration stage, a HEPA filter was used. Its task is to retain the smallest pollution particles, as well as all unpleasant and harmful odors and volatile compounds. The ionizer is another element of the comprehensive air purification system. In the SAP51 model, the ionization efficiency is very high - 10 × 10^6 ions per second. Thanks to this solution, the device almost completely eliminates the harmful effects of positive ions generated by electrical equipment. Positive ions, which attract bacteria and viruses, as well as airborne fungi, mold, and other allergens, lose their properties due to ionization. Air saturated with negative ions causes all microorganisms to fall to the ground, thus not reaching the lungs. The final purification stage is the use of a UV bulb, whose light damages the cell nuclei of microorganisms (bacteria, viruses, fungi). It has a supporting function that ultimately sterilizes the airflow passing through the device.

The SAP51 air purifier is designed for areas up to 40 m2. The reason for this is the high CADR efficiency index (Clean Air Delivery Rate), which allows it to provide up to 165 m3 of purified air per hour.

The electronic control system equipped in the SAP51 model allows for easy and intuitive management of the purification process. The air quality indicator shows its quality on a scale from green (very good) to red (very dirty) lines. The device operates at three speeds, which can be controlled from the control panel or with a remote control - low (500 rpm), medium (700 rpm), and high (900 rpm). You can check the current speed on the cleaning speed indicator located on the control panel. An important feature of the SAP51 is the timer function. Thanks to this, you can set how long the device will operate. The time can be set from 30 minutes to 12 hours. After this time, the purifier will turn off by itself. The SAP51 is characterized by low noise level operation. Depending on the speed at which the device is currently operating, it ranges from 25 to 40 dB. The remote control has the same buttons found on the control panel. Thanks to this, controlling the device is simple and intuitive. The remote control is powered by batteries included in the package.